Robotics

From Baystation 12
Jump to: navigation, search

For the aspiring Roboticist, this guide will explain the creation and of Cyborgs, bots, and exosuits.

Cyborgs

See also Cyborgification Contracts. These contracts are important - without a signed, stamped contract, making a man into a machine is technically murder - no matter how much he wants it!

The cyborg is the Roboticist's primary creation and upkeep. They are tasked with helping the station's inhabitants in their daily life and trying to kill everyone when the AI is insane. Each cyborg is required to follow the AI's laws, and may choose one of the AIs in the event that more than one exists.

Making a Cyborg

  1. Fill the Exofab.png Exosuit Fabricator with as much Metal.png metal as it will hold.
  2. Click on the Exosuit Fabricator to open its menu. Select Add all parts to queue beside the Cyborg option, and then click Process Queue in the right sidebar (with a recent update, please note that adding "all parts" will print four extra components that are only used for repair, not construction).
  3. Wait for a few minutes for the pieces to be built. You will likely need to add additional metal to the Fabricator in order for it to finish.
  4. When putting the parts together, use the Cyborg endoskeleton.png Cyborg Endoskeleton as a base.
    • The Cyborg Head will need 2x Flash.png Flash.
    • The Cyborg Torso will need 1x CableCoils.png wires and 1x Powercell.png power cell.
    • The arms and legs can be done easily by simply picking them up and placing them on the Cyborg Endoskeleton.

Extract a brain for the Cyborg

Note: Check with the Chief Medical Officer before agreeing to perform a brain extraction on a living human. Medbay has anesthetics, which are optimal when someone is cutting into your skull with a circular saw. Additionally, it will clear up bookkeeping problems regarding the addition of a new cadaver in the morgue.

  1. (Optional) Complete Prepping for Surgery.
  2. Aim for the organ's location in the Damage zone.png Damage Zone. (Head for brain/eyes, chest for heart/liver/lungs, groin for appendix/kidney)
  3. Use a Scalpel.png scalpel to cut back the flesh.
  4. Use the Hemostat.png hemostat to stop any potential bleeding.
  5. Use your Retractor.png retractors to lift up the skin.
  6. Use the Saw.png saw to cut through the bones.
  7. Use the Retractor.png retractor to separate the bones.
  8. Use the Scalpel.png scalpel. This will open up a window asking you which organ you'd like to cut loose. Select the Brain.
  9. Use the Hemostat.png 'hemostat. This will open up a window asking you which loose organ you'd like to remove. Select the Brain again.
  10. Place the brain in an MMI empty.png MMI.
  11. (Optional) Before you give the Cyborg a new brain, you can name it anything you or your client wants. Grab a Pen.png pen and use the pen on the Cyborg to rename it. Once you place the brain in the Cyborg, this step will not be completable.
  12. Carry the MMI.png MMI over to your finished Cyborg construct that you made before, and click on it to add the brain into the Cyborg.

You can also use a normal table instead of an operating table, but this has a chance of missing one third of the time.

So You Decapitated Your Patient

Don't panic just yet! You can still complete the brain extraction by placing their head on the operating table and following the same steps as above. You should probably apologize to them after putting their brain in an MMI, though.

Cyborg Maintenance

You'll often have Cyborgs run up to you with any number of problems. Here's how to deal with them most of the time.

Occasionally a robot will be so damaged that only the brain is salvageable, or perhaps it's volunteering for an AI core. You can remove the brain by following these steps.

  1. Id regular.png Swipe an ID with Robotics access to unlock the panel.
  2. Crowbar.png Crowbar open the panel. This takes a moderate amount of time.
  3. Power cell.png Remove the cyborg's power cell by clicking on it with an empty hand.
  4. Screwdriver4.png Use a screwdriver to expose the wires.
  5. Wirecutters.png Cut all five wires with wirecutters.
  6. Crowbar.png Use a crowbar to remove the MMI.

Upgrading the Power Cell

Cyborgs that start when the game starts will likely come straight to you for an upgrade in the first few minutes of the game. Help them out by upgrading their power cell, which will lessen the amount of time they need to visit the recharging station. Click on the Cyborg with the following items (in order):

  1. Id regular.png Swipe an ID with Robotics access to unlock the panel.
  2. Crowbar.png Crowbar open the panel.
  3. Click on the Cyborg with an Empty hand.png empty hand to take out the Powercell.png power cell and replace it with the higher-capacity power cell.
    • Note: The default power cell capacity in Cyborgs is 7,500. All of the power cells you find in your office should be at least 15,000, and the Science Department can research power cells that exceed 30,000.
  4. Crowbar.png Crowbar the panel shut.
  5. Id regular.png Swipe an ID with Robotics access to relock the cover.

Resetting Modules

Once a player Cyborg chooses a module (Engineer, Janitor, Security, etc.) they cannot change the module without your help. You can manually reset its module to allow it the option of choosing a new one by following this order:

  1. Id regular.png Swipe an ID with Robotics access to unlock the panel.
  2. Crowbar.png Crowbar open the panel.
  3. Robotics reset module circuit.png Print out a reset upgrade in the fabricator, and insert it into the cyborg.
  4. Crowbar.png Crowbar the panel shut.
  5. Id regular.png Swipe an ID with Robotics access to relock the cover.

Modifications

Cyborgs that have had their programming tampered with can be repaired by resetting their AI connection and LawSync status, by manually pulsing the wiring. In the unlikely event that an AI goes crazy, a trained Roboticist or other technician should be able to sever the connection to the AI entirely by cutting the correct wire.

There are three lights in the cyborg with three corresponding wires:

  • LawSync: If this light is on, it means that any laws uploaded to the AI are also uploaded to the cyborg. The cyborg cannot be given different laws to the AI as long as this is on. This light will turn off if the AI Link light is off, regardless of wire status.
    • Pulsing does nothing.
    • Cutting will do nothing, as long as the AI link light is on. If the AI link light is off, cutting and then turning the AI link back on will cause the cyborg to be slaved to an AI, but not synced with its laws.
    • Mending this wire will turn the LawSync light back on as long as the AI link light is also on. The cyborg will then resume syncing with the AI's laws. If the AI link light is off, mending this will turn the light on, only for it to turn off again.
  • AI Link: If this light is on, it shows that the Cyborg is slaved to an AI and must follow that AI's orders.
    • Pulsing this wire allows you to pick an AI for the cyborg to be slaved to if there are multiple AIs. If there is only one AI, pulsing this will simply turn it on and slave the cyborg to it, if it is off.
    • Cutting this wire will cause the Cyborg to be unslaved from the AI and bound only by its laws. This also turns off LawSync, as the cyborg has no AI to sync to.
    • Mending this wire does nothing. You need to pulse it to reconnect it to an AI.
  • Module Lock: If this light is on, the module of the cyborg cannot be changed.
    • Pulsing this will reset the module of a cyborg and allow it to pick a new one.
    • Cutting this wire will cause the cyborg to be locked to the standard module and be unable to change or use any items. They can still remote control devices however.
    • Mending this wire will allow the cyborg to change modules.

An emagged cyborg will have no LawSync or AI link and cannot be reset.

Remember, cyborgs are very expensive! Do not destroy them unless the cyborg is completely out of control, and resetting the AI and LawSync status doesn't work.

IPCs

Sometimes, you will need to repair synthetics other than Cyborgs, such as IPCs. The procedures for repairing an IPC are quite different from that of cyborgs, and are as follows:

IPC revival

IPCs can be revived much like their biological counterparts, as follows: While targeting the chest:

  1. Screwdriver4.png Open the chest's hatch using a screwdriver.
  2. Crowbar.png Pry open the hatch using a crowbar.
  3. Multitool.png Decouple either the Positronic brain or the cell using a multitool.
  4. Hemostat.png Remove the chosen organ with the hemostat
  5. Crowbar.png (If chest was damaged) Close and secure the hatch using a crowbar.
  6. CableCoils.png|Welderon.gif Repair the IPC chassis (at least until it wouldn't immediately die if revived).
  7. Screwdriver4.png (If chest was damaged) Open the chest's hatch using a screwdriver.
  8. Crowbar.png (If chest was damaged) Pry open the hatch using a crowbar.
  9. Insert the chosen organ by clicking on the IPC with it in your hand.
  10. Screwdriver4.png (Cell only) reattach the chosen organ using a screwdriver
  11. Crowbar.png Close and secure the hatch using a crowbar.

Note: Currently there's a bug that doesn't let the positronic brain be inserted in to the chest where it's supposed to be. Work around it by inserting it in to the head (which is technically wrong). Same procedure: screwdriver, crowbar, brain, crowbar, screwdriver.

Bots

As a Roboticist, you serve another important purpose, making NPC robots. Robots can benefit the station in many ways, and are really easy to create. The current list of robots, and how to make them, is as follows:

Medibot.gif Medibot

Will inject people with chemicals when they are damaged more than the set healing threshold. By default, they will synthesise and inject tricordrazine for brute, burning, toxic, and suffocation damage, and spaceacillin for viral damage. If set to use a beaker, and a beaker with a chemical is put in them, they will inject that chemical into patients. If emagged, they will synthesise and inject anyone with harmful chemicals, damaged or not.

Combine the following ingredients in order:

  1. Cyborg Right or Left Arm.
  2. Empty SMed.png Medkit.
    • Note: Differently coloured medkits will also change the resulting colour of your Medibot.
  3. (Optional) Name the bot with a Pen.png pen.
  4. Healthanalyzer.png health analyzer.
  5. Proximitysensor.png proximity sensor.
  6. (Optional) Beaker.png Insert beaker filled with the medicine of your choice.

Cleanbot.gif Cleanbot

Cleanbots are great, as they serve exactly the same purpose as the Janitor. Even better is that it uses Space Cleaner to mop, so no slipping on everything!

  1. Bucket.png bucket (Grab it from the Janitor or make with Autolathe)
  2. Proximitysensor.png proximity sensor.
  3. (Optional) Name the bot with a Pen.png pen.
  4. Cyborg Right or Left Arm.

Floorbot.gif Floorbot

Floorbots are nice to have around when some asshole starts crowbarring up floor tiles or some traitor has blown apart a section of the station. They zoom around and repair busted floor tiles. To make:

  1. Empty Btoolbox.png toolbox (Must be a blue one)
  2. Floor Tiles.png Floor tile (click on a stack of metal while it's in your hand to open a menu for making these)
  3. Proximitysensor.png proximity sensor.
  4. (Optional) Name the bot with a Pen.png pen.
  5. Cyborg Right or Left Arm.

Keep in mind that Floorbots have a limited number of floor tiles. This number can be observed by popping up their control panel.

Farmbot.png Farmbot

A relatively useful bot that helps with the mundane aspects of Hydroponics and Xenobotany. To make one:

  1. Attach a robot arm (cyborg right or left arm) to a Watertank.png water tank.
  2. Attach a plant analyzer.
  3. Attach a Bucket.png bucket.
  4. (Optional) Name the bot with a Pen.png pen.
  5. Attach a mini-hoe.
  6. Proximitysensor.png proximity sensor.

I AM THE LAW Securitron

Basically, Officer Beepsky without the personality. You usually won't need to build any of these, but they can be hilariously helpful for traitors whom have invested in a Electromagnetic Card, as they tend to run around stunning and cuffing everyone in sight. Problem is, any of these that report a Level 10 Infraction when spotting people are obviously hacked. To make:

Note that destroying a Securitron or Officer Beepsky with a melee weapon is all but impossible by yourself; striking them causes them to immediately stun and cuff you. If you work with another person you can get several hits in while it is cuffing the other person, which is often enough to destroy it outright.

ED209.png ED-209

Beepsky's bigger brother. Has all of the abilities of a standard Securitron with the addition of a ranged attack. To make:

An emagged ED-209 fires deadly lasers AND attacks anyone on sight.

Spiderbot

Spiderbots are temporary bodies for brains. They can carry around small items, zap things, move through vents and generally act like pests.

Combine the following:

  • Robot head.
  • Manipulator.
  • Occupied MMI or positronic brain.

Mechs

Construction of mechs are restricted by ID, so they are typically the product of roboticists and the Research Director. These can be tremendously helpful or tremendously annoying depending on who uses it. They take more work to make than robots and require special circuits, which are obtained through the Quartermaster or the Research and Development console.

The current list of mechs is as follows.

Ripley.png Ripley APLU

Requires
78 x Metal sheets, 7 x Glass sheets, 5 x Plasteel sheets, 1 x Ripley central control, 1 x Ripley peripherals control

The Ripley APLU (Autonomous Power Loading Unit) is a slow moving, decently protected mech. Generally, it can take down a Gygax because of the sheer power of the drill, but it does not make a good combat mech because it is slow and has no range. Best used against Spess carp invasions, blobs, Changelings, and for Revs (using it to breach high security areas)

Construction:

  1. Build all of the Ripley parts using the exosuit fabricator.
  2. Build a Hydraulic Clamp and Drill
  3. Attach all of the parts to the Ripley chassis (Except the Clamp and Drill)
  4. Wrench
  5. Screwdriver
  6. Cable Coil
  7. Wirecutters
  8. Ripley central control module (Ordered from the Quartermaster)
  9. Screwdriver
  10. Ripley Peripherals control module (Ordered from the Quartermaster)
  11. Screwdriver
  12. 5 pieces of metal
  13. Wrench
  14. Weldingtool
  15. 5 pieces of plasteel
  16. Wrench
  17. Weldingtool

The Ripley should be complete, to access it use your ID card on it. The codes on the system mean that you have to have access to those places on your ID to use the mech. Click finish, then right-click to enter.

Optimal Loadouts

  • Mining: Hydraulic Clamp, Drill

Firefighter.png Firefighter APLU

Requires
85 x Metal sheets, 8 x Glass sheets, 15 x Plasteel sheets, 1 x Firesuit, 1 x Ripley central control, 1 x Ripley peripherals control

Construction:

  1. Create a Firefighter APLU chassis using the exosuit fabricator. It is listed under exosuit equipment.
  2. Create all parts of the Ripley APLU except for the chassis.
  3. Assemble all of the Ripley parts to the Firefighter chassis.
  4. Add a firesuit
  5. Wrench
  6. Screwdriver
  7. Cable Coil
  8. Wirecutters
  9. Ripley central control
  10. Screwdriver
  11. Ripley peripherals control
  12. Screwdriver
  13. 5 pieces of plasteel
  14. Wrench
  15. Weldingtool
  16. 5 pieces of plasteel
  17. 5 pieces of plasteel
  18. Wrench
  19. Weldingtool

Optimal Loadouts

  • Hull Repairs: Clamp, RCD, Cable Layer
  • Firefighting: Clamp, Extinguisher, Repair Droid

Mecha odysseus.png Odysseus

Requires
51 x Metal sheets, 5 x Glass sheets, 5 x Plasteel sheets, 1 x Odysseus central control, 1 x Odysseus peripherals control

Construction:

  1. Create all of the Odysseus parts using the exosuit fabricator.
  2. Assemble all of the Odysseus parts to the chassis
  3. Wrench
  4. Screwdriver
  5. Cable coil
  6. Wirecutters
  7. Odysseus main board
  8. Screwdriver
  9. Odysseus peripherals board
  10. Screwdriver
  11. 5 pieces of metal
  12. Wrench
  13. Welder
  14. 5 pieces of plasteel
  15. Wrench
  16. Welder

Optimal Loadouts:

  • 3 Mounted Sleepers
  • 2 Mounted Sleepers, 1 Syringe Gun

Gygax.png Gygax

Requires
143 x Metal sheets, 15 x Glass sheets, 5 x Diamonds, 1 x Gygax central control, 1 x Gygax peripherals control, 1 x Gygax weapon control and targeting, 1 x Advanced scanning module, 1 x Advanced capacitor

Rather fast security exosuit with good overall protection. Very low battery life, so be sure to watch it. Requires diamond sheets to complete.

  • Leg Actuators Overload Function (Movement speed doubled and small amount of damage dealt with each step. Disables when Gygax integrity drops below 2/3)

Construction:

  1. Create all of the Gygax parts using the exosuit fabricator.
  2. Assemble all of the Gygax parts to the chassis (Except the Armour plates)
  3. Wrench
  4. Screwdriver
  5. Cable Coil
  6. Wirecutters
  7. Gygax Main circuit board (Bug R&D to research it)
  8. Screwdriver
  9. Gygax Peripherals circuit board (Bug R&D to research it)
  10. Screwdriver
  11. Gygax Targeting circuit board (Bug R&D to research it)
  12. Screwdriver
  13. Add an Advanced Scanning Module (Bug R&D)
  14. Screwdriver
  15. Add an Advanced Capacitor (Bug R&D)
  16. Screwdriver
  17. Add some metal
  18. Wrench
  19. Weldingtool
  20. Add Gygax Armour Plates (Made in the exosuit fabricator)
  21. Wrench
  22. Weldingtool

Durand.png Durand

Requires
153 x Metal sheets, 15 x Glass sheets, 13 x Silver sheets, 5 x Uranium sheets, 1 x Durand central control, 1 x Durand peripherals control, 1 x Durand weapon control and targeting, 1 x Advanced scanning module, 1 x Advanced capacitor

A Durand is more powerful than Gygax, it has more health and better armoured, but slower. Requires silver sheets to complete.

  • Defence Mode Function (Boosts Durand armour with the penalty of not being able to move or turn)

Construction:

  1. Create all of the Durand parts using the exosuit fabricator.
  2. Assemble all of the Durand parts to the chassis (Except the Armour plates)
  3. Wrench
  4. Screwdriver
  5. Cable Coil
  6. Wirecutters
  7. Durand Main circuit board (Bug R&D to research it)
  8. Screwdriver
  9. Durand Peripherals circuit board (Bug R&D to research it)
  10. Screwdriver
  11. Durand Targeting circuit board (Bug R&D to research it)
  12. Screwdriver
  13. Add an Advanced Scanning Module (Bug R&D)
  14. Screwdriver
  15. Add an Advanced Capacitor (Bug R&D)
  16. Screwdriver
  17. Add some metal
  18. Wrench
  19. Weldingtool
  20. Add Durand Armour Plates (Made in the exosuit fabricator)
  21. Wrench
  22. Weldingtool

Mecha marauder.png Marauder

Used by the Deathsquad Emergency Response Team or Nanotrasen Asset Protection if the Admins want them to. A Marauder is equipped with:

  • Heavy Pulse Rifle
  • Missile launcher (8 missiles)
  • Zoom Function (Allows you to see twice as far with the penalty of not being able to move or turn)
  • Thrusters for EVA use
  • Internal Airtank

Pod.png Hoverpod

Orderable by cargo, hoverpods are handy for space exploration, and are a necessary part of any adventurer's quest. A hoverpod has three attachment slots and five cargo slots, and comes pre-equipped with:

  • A passenger compartment
  • A hydraulic clamp
  • Thrusters for EVA use
  • Internal Airtank

Mech Equipment

Various tools and weapons can be attached to mechs, providng them with ability to perform different tasks. Mech Equipment is built by Mech Fabricator ("Exosuit Equipment" menu). To attach a tool or weapon, simply click with it on mecha. Most mechs can hold no more than three equipment pieces.

Drill
The drill can completely destroy most objects (with the exception of reinforced walls) in a few seconds. Using the drill on someone will gib them in a few seconds. So don't do that unless you're a traitor.

When used for mining, targeted and two adjacent mineral deposits will be drilled. If Ripley exosuit is equipped with Hydraulic Clamp and has an Ore Box in cargo, all mined ore will be moved to Ore Box.
(Can be attached to: RIPLEY)

Diamond Drill
Essentially an upgraded drill. Isn't any stronger, but it is faster (all you need for mining really). Bug R&D to sync their servers and in no time mining can obliterate the asteroid (provided that they bring you diamonds first)
(Can be attached to: RIPLEY)

Hydraulic Clamp
Gives it an ability to load objects into cargo compartment, or lets you crush people with it.
(Can be attached to: Any Non-medical mech)

Extinguisher
Mecha-mounted extinguisher. Can be refilled by clicking on the Water Tank.
(Can be attached to: Any Non-medical(?) mech)

Teleporter
Mecha-mounted teleporter. Can teleport mecha to any location in view. Must be researched first (Requires: 'Blue-space' Research 10, Electromagnetic Spectrum Research 5. Currently only adminspawnable due to the high research level - don't bother, really. Or steal it from the Centcomm mechs. You know you want to just hijack the deathsquad shuttles after taking their IDs off their burnt corpses, charge out the doors with your stolen weapons in hand, hack your way through the multitudinous doors as more security rushes in with murder in mind and pulse cannons and power armour at hand, until you finally get to your prizes, the mech bay - only to steal the teleporters mounted on them and scarper back to the station to use them in the destructive analyser. You know it's what you want to do. Do it. Do it. Do it.)
(Can be attached to: Any mech)

Gravitational Catapult
Can be used to throw objects around (S mode) or move them away from target (P mode). Must be researched first (Requires: 'Blue-space' Research 2; Electromagnetic Spectrum Research 3; Engineering 3).
(Can be attached to: Any Non-medical(?) mech)

Wormhole Generator
As the name implies, Wormhole Generator creates a wormhole (similar to ones spawned at Space-Time Anomalies event) at target location. Must be researched first (Requires: 'Blue-space' Research 4).
(Can be attached to: Any Non-medical(?) mech)

Mounted RCD
An exosuit-mounted Rapid Construction Device.
(Can be attached to: Any mech)

Armour Booster Module (Close Combat Weaponry)
Boosts exosuit armour against armed melee attacks. Requires energy to operate.
(Can be attached to: Any mech)

Armour Booster Module (Ranged Weaponry)
Boosts exosuit armour against ranged attacks. Completely blocks taser shots. Requires energy to operate.
(Can be attached to: Any mech)

Repair Droid
Automated repair droid. Scans exosuit for damage and repairs it. Can fix almost all types of external or internal damage.
(Can be attached to: Any mech)

Energy Relay
Wirelessly drains energy from any available power channel in area. The performance index is quite low.
(Can be attached to: Any mech)

Phoron Generator
Generates power using solid phoron as fuel. Pollutes the environment.
(Can be attached to: Any mech)

ExoNuclear Reactor
Generates power using uranium. Pollutes the environment.
(Can be attached to: Any mech)

Cable Layer
(Can be attached to: Any mech)

Syringe Gun
Exosuit-mounted chem synthesizer with syringe gun. Reagents inside are held in stasis, so no reactions will occur.
(Can be attached to: Any medical mech (Odysseus))

Mounted Sleeper
Acts exactly like a sleeper, but with free rides!
(Can be attached to: Any medical mech (Odysseus))

Mech Weapons

CH-PS "Immolator" Laser
Fires a Laser bolt, identical to the "laser gun".
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

CH-LC "Solaris" Laser Cannon
Fires a Heavy Laser bolt, identical to the "laser cannon".
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

mkIV Ion Heavy Cannon
Fires an Ion bolt, identical to the "Ion rifle".
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

eZ-13 mk2 Heavy pulse rifle
Fires a heavy pulse laser.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

PBT "Pacifier" Mounted Taser
Fires a taser bolt, identical to the security taser.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

LBX AC 10 "Scattershot"
Fires a medium-sized bullet, similar damage as the Mini-UZI.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

Ultra AC 2
Fires a weak bullet, similar damage as the Submachine Gun.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

SRM-8 Missile Rack
Fires a missile which will explode on impact.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

SGL-6 Grenade Launcher
Shoots out a flashbang at medium range.
(Can be attached to: Any combat mech (Durand, Gygax, Marauder and Phazon))

Mech Maintenance

Replacing Batteries

Note: The default capacity of a power cell in any of the civilian mechs is 15,000. To have any effectiveness, replace with Super Capacity Cells (20,000) or Hyper Capacity Cells (30,000). The power cells in military mechs cannot be removed or replaced.

Repair

  • Equip a WeldingHelmet.png welding helmet on your head.
    • Note: Be sure to remember this step or you could go blind!
  • Place a Welderon.gif welder in your hand, click on it while it's in your hand to light it, then click on the Mech repeatedly to repair it.


Removal of jammed user

If the driver of a mecha is unconscious in his mech; you are able to remove him/her by following a series of steps.

Misc. items

TV camera

Bring the news of the station directly to the screens of the crew. The journalist will thank you for providing him with this piece of entertainment technology.

  • Get Robot head
  • Infrared sensor -> Makes the assembly. Looks like robot head.
  • Add robot camera
  • Add Tape recorder
  • Add 3 CableCoils.png wires
  • Use Wirecutters.png wirecutters on assembly
  • Add 1 Metal sheets steel plate