Guide to Construction

From Baystation 12
Jump to: navigation, search

Materials

Materials
Construction Requires Instructions
Rods.png Rods (2x) 1x Metal.png Use metal and click "2x metal rods"
Floor Tiles.png Floor Tiles (4x) 1x Metal.png Use metal and click "4x floor tiles"
Glass r.png Reinforced Glass 1x Rods.png, 1x Glass.png Use rods on glass.
Metal r.png Reinforced Metal 1x Iron ore.png, 1x Coal.png, 1x Platinum ore.png Smelt in the furnace.

Floors

Floors
Construction Requires Instructions
Lattice.png Lattice 1x Rods.png With rods in hand, place on empty space tile. Used as a basis for plating.
Catwalk1.jpg Catwalk 1x Rods.png With rods in hand, click on lattice or plating. Used as a more permanent structure over open spaces or to leave underfloor piping and wiring visible. Deconstruct with welder.
Plating.png Plating 1x Floor Tiles.png Place by having the floor tile in your hand, and click on a lattice. Blocks air and can be used for further construction. Deconstruct with welder, then crowbar.
Floor.png Floor 1x Floor Tiles.png Place by having the floor tile in your hand, and click on a plating. Basic floor tiles that cover up wires and pipes. Deconstruct with crowbar.

You can also construct wooden and other floors the same way.

Lightfloor.gif Light Floor Screwdriver4.png, Autolathe.gif Created in the autolathe then dragged to a plating, use screwdriver to secure.

Walls

Walls
Construction Requires Instructions
Wall.png Regular Wall 4x Metal.png OR 2x Metal.png and any 2x stacked material. Press on metal and create a girder. Use metal or stacked material on the girder to complete the construction. Deconstruct using a welding tool, then a wrench.
Rwall.png Reinforced Wall 2x Metal.png, 4x Metal r.png OR any 4x stacked material, Screwdriver4.png Press on metal and create a girder.

Screwdriver on girder, then place reinforced metal or stacked material on girder twice to complete the construction.

Deconstruction
  1. Wirecutters.png Wirecutters.
  2. Screwdriver4.png Screwdriver.
  3. Welderon.gif Welder.
  4. Crowbar.png Crowbar.
  5. Wrench.png Wrench.
  6. Welderon.gif Welder.
  7. Crowbar.png Crowbar.
  8. Screwdriver4.png Screwdriver.
  9. Wirecutters.png Wirecutters.
  10. Wrench.png Wrench the remaining girder.


Grille.png Grille 2x Rods.png Press on rods to create a grille. Use a screwdriver to move the grille, and use wirecutters to deconstruct the grille.

You can place a powered wire underneath to electrify the grille.

Glass

Glass
Construction Requires Instructions
Glass panel.png Glass Panel 1xGlass.png,Screwdriver4.png Click on the glass sheet, select one directional. Right-click the panel to rotate. Use screwdriver to complete construction. You can also left-click a grille with the glass sheet to place directly on the grille.
Glass full.png Full Glass 2xGlass.png,Screwdriver4.png Click on the glass sheet, select full. Use screwdriver to complete construction.
Glass panelr.png Reinforced Glass Panel 1xGlass r.png,Screwdriver4.png,Crowbar.png Click on the glass sheet, select one directional. Right-click the panel to rotate. Use the following sequence to complete construction:

Screwdriver4.png Screwdriver , Crowbar.png Crowbar, Screwdriver4.png Screwdriver. Reverse to deconstruct.

You can also left-click a grille with the glass sheet to place directly on the grille.

Glass fulllr.png Reinforced Full Glass 2xGlass r.png,Screwdriver4.png,Crowbar.png Click on the glass sheet, select full. Use the following sequence to complete construction:

Screwdriver4.png Screwdriver , Crowbar.png Crowbar, Screwdriver4.png Screwdriver. Reverse to deconstruct.

Airlocks & Doors

Airlocks & Doors
Construction Requires Instructions
Airlock.gif Airlock 4x Metal.png,1xGlass r.png,Screwdriver4.png,Wrench.png,CableCoils.png,Circuitboard.png
Construction
  1. Metal.png Use metal to make an airlock assembly.
  2. Wrench.png Wrench airlock assembly in place.
  3. (Optional) Use a pen to name the airlock.
  4. (Optional) Glass r.png Add reinforced glass to make a glass airlock.
  5. CableCoils.png Add wires to assembly.
  6. Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels.
  7. Circuitboard.png Add airlock control board to assembly.
  8. Screwdriver4.png Screwdriver to finish.


Deconstruction
  1. Screwdriver4.png Screwdriver the door.
  2. Use multitool and wirecutters to disable everything except the doorbolts as detailed here. Doorbolts must be up for this to work.
  3. Welderon.gif Weld the door shut.
  4. Crowbar.png Crowbar the electronics out. (if the door is electrified, this won't work for some reason)
  5. Wirecutters.png Wirecut the wires out.
  6. Wrench.png Unsecure it with a wrench.
  7. Welderon.gif Weld it to deconstruct to metal plates.


Hazard door.png Emergency Shutter 4x Metal.png,Wrench.png,CableCoils.png,Circuitboard.png
Construction
  1. Metal.png Use metal to make an airlock assembly.
  2. Wrench.png Wrench airlock assembly in place.
  3. CableCoils.png Add wires to assembly.
  4. Circuitboard.png Add air alarm circuit board to assembly.


Deconstruction
  1. Screwdriver4.png Screwdriver the shutter to open it's hatch.
  2. Welderon.gif Weld the shutter closed.
  3. Crowbar.png Crowbar the Electronics out.
  4. Wrench.png Wrench the shutter assembly to unsecure it.
  5. Welderon.gif Weld the unsecured assembly to disassemble it into sheets of metal.


Windoor.png Window Door 5xGlass r.png,4x Rods.png,Wrench.png,CableCoils.png,Screwdriver4.png,Crowbar.png,Circuitboard.png
Construction
  1. Glass r.png Click on reinforced glass and click "windoor."
  2. Wrench.png Use a wrench to secure.
  3. Rods.png (Optional) Add rods to make a secure windoor
  4. CableCoils.png Add wires
  5. Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels.
  6. Circuitboard.png Add airlock control board to assembly.
  7. Crowbar.png Use a crowbar to finish the assembly.


False wall.gif Regular Hidden Door 4x Metal.png, Crowbar.png Use metal and create a wall girder. Use a crowbar on the girder, then place the rest of the metal.

You can also deconstruct a wall to the girder state, then start this construction to turn an existing wall into a hidden door.

False wallr.gif Reinforced Hidden Door 2x Metal.png,2x Metal r.png, Crowbar.png Use metal and create a wall girder. Use a crowbar on the girder, then place the reinforced metal.

Wall Mountings

Wall Mountings
Construction Requires Instructions
Apc.png APC 2xMetal.png,Powercell.png,Wrench.png,CableCoils.png,Screwdriver4.png,Crowbar.png,Circuitboard.png
Construction
  1. Metal.png Use metal to make an APC frame and use the frame on the wall you want it on.
  2. CableCoils.png Add wire to the assembly.
  3. Circuitboard.png Add power control module to the assembly.
  4. Screwdriver4.png Screwdriver the assembly.
  5. Powercell.png Add powercell to assembly.
  6. Crowbar.png Use crowbar to shut.
  7. Use an ID card to open the APC and turn the main beaker on.


Deconstruction
  1. Swipe card to unlock APC
  2. Remove the power cell.
  3. Screwdriver4.png Screwdriver the assembly.
  4. Crowbar.png Lift the floorboards in front of the APC.
  5. Wirecutters.png Wirecut the assembly.
  6. Crowbar.png Crowbar the assembly to remove the control.
  7. Welderon.gif Use the welder to remove the APC from the wall.
  8. (Optional) Wrench the frame to remove it.


Airalarm.png Air Alarm 2xMetal.png,CableCoils.png,Screwdriver4.png,Circuitboard.png
Construction
  1. Metal.png Use metal to make an air alarm frame and use the frame on the wall you want it on.
  2. Circuitboard.png Insert the air alarm electronics to the assembly.
  3. CableCoils.png Wire the assembly.
  4. Screwdriver4.png Screwdriver to complete.


Deconstruction
  1. Screwdriver4.png Open the cover.
  2. Wirecutters.png Wirecut the assembly.
  3. Crowbar.png Pry out the circuit.
  4. Wrench.png Remove the air alarm from the wall.


Firealarm.png Fire Alarm 2xMetal.png,CableCoils.png,Screwdriver4.png,Circuitboard.png
Construction
  1. Metal.png Use the metal and make an air alarm frame.
  2. Use the frame on the wall you want it on.
  3. Circuitboard.png Put in the electronics.
  4. CableCoils.png Wire with cables.
  5. Screwdriver4.png Screwdriver to close.


Deconstruction
  1. Screwdriver4.png Open the cover.
  2. Wirecutters.png Wirecut the assembly.
  3. Crowbar.png Pry out the circuit.
  4. Wrench.png Remove the air alarm from the wall.


Lightfixture.png Light Fixture 2xMetal.png,CableCoils.png,Screwdriver4.png
Construction
  1. Metal.png Use metal to make an light fixture frame or small light fixture frame and use the frame on the wall you want it on.
  2. CableCoils.png Wire the assembly.
  3. Screwdriver4.png Screwdriver to complete.
  4. Add a light tube for large frame or a lightbulb for small frame.


Security Camera.gif Security Camera Camera Assembly,CableCoils.png,Screwdriver4.png,Wrench.png,Welderon.gif
Construction
  1. Drop the camera assembly infront of the wall you would like it to be.
  2. Wrench.png Wrench the camera assembly.
  3. Welderon.gif Weld the camera into place.
  4. CableCoils.png Add the wiring.
  5. (Optional) Add any additional upgrades.
  6. Screwdriver4.png Screwdriver to complete and set networks / direction.


Misc

Misc
Construction Requires Instructions
Computer solar.png Non-Modular Computer 5x Metal.png, 2x Glass.png, CableCoils.png, Wrench.png, Screwdriver4.png, Circuitboard.png
Construction
  1. Metal.png Use the metal and create the computer frame.
  2. Wrench.png Wrench in place.
  3. Circuitboard.png Insert computer circuitboard of your choice.
  4. Screwdriver4.png Use the screwdriver on assembly.
  5. CableCoils.png Insert wires to assembly.
  6. Glass.png Insert glass to assembly.
  7. Screwdriver4.png Screwdriver to complete the construction.


Deconstruction
  1. Screwdriver4.png Screwdriver to detach the screen.
  2. Crowbar.png Crowbar to pry off the screen.
  3. Wirecutters.png Wirecutters to cut the cables.
  4. Screwdriver4.png Screwdriver to detach the circuit lid.
  5. Crowbar.png Crowbar to pry out the circuit.
  6. Wrench.png Wrench to detach the frame.
  7. Welderon.gif Welder to disassemble the frame.


Modular computer console.png Modular Computer 20x/15x/10x/5x Metal.png, Components
Construction
  1. Metal.png Use the metal and create the modular computer frame.
    1. Consoles require 20 metal.
    2. Telescreens require 15 metal.
    3. Laptops require 10 metal.
    4. Tablets require 5 metal.
  2. Add the required components. These can be found in Tech Storage, printed from the Protolathe, or yanked out of existing computers.
    1. Processing Module
    2. Hard Disk
    3. Tesla Relay or Device Power Cell
    4. (Recommended) Networking Card
    5. (Optional) RFID Scanner, Nano Printer, etc.


Deconstruction
  1. Screwdriver4.png Screwdriver repeatedly to remove all the components.
  2. Wrench.png Wrench to dismantle the computer frame.


Turret.png Turrets 7x Metal.png, Screwdriver4.png, Welderon.gif, Wrench.png, Energygun.png,Proximitysensor.png
Construction
  1. Metal.png Use the metal and create the turret frame.
  2. Wrench.png Wrench in place.
  3. Metal.png Use metal on the assembly to add a cover.
  4. Wrench.png Use wrench on the cover to secure.
  5. Energygun.png Add a energy weapon to the assembly.
  6. Proximitysensor.png Add a proximity sensor to the assembly.
  7. Screwdriver4.png Screwdriver to secure.
  8. Metal.png Add more metal to the frame.
  9. Welderon.gif Weld to complete the construction.


Disposal bin.png Disposal Pipes and Machinery Disposal Dispenser, Crowbar.png, Welderon.gif, Wrench.png
Construction
  1. Retrieve the pipe or machinery from the disposal dispenser.
  2. Crowbar.png Crowbar any floor tiles that may be in the way.
  3. Wrench.png Move pipe onto plating, you can rotate the pipe using right-click. Wrench into place.
  4. Welderon.gif Weld to complete.


To deconstruct pipes, welder, wrench. To deconstruct machines, use a screwdriver.